/*====================================================================*
 *
 *   Copyright (c) 2013 Qualcomm Atheros, Inc.
 *
 *   All rights reserved.
 *
 *   Redistribution and use in source and binary forms, with or
 *   without modification, are permitted (subject to the limitations
 *   in the disclaimer below) provided that the following conditions
 *   are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *
 *   * Redistributions in binary form must reproduce the above
 *     copyright notice, this list of conditions and the following
 *     disclaimer in the documentation and/or other materials
 *     provided with the distribution.
 *
 *   * Neither the name of Qualcomm Atheros nor the names of
 *     its contributors may be used to endorse or promote products
 *     derived from this software without specific prior written
 *     permission.
 *
 *   NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
 *   GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE
 *   COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
 *   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 *   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 *   PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
 *   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 *   NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 *   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 *   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 *   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
 *   OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 *   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *--------------------------------------------------------------------*/

/*====================================================================*
 *
 *   ampID.c - Atheros Powerline Device Identity
 *
 *
 *   Contributor(s):
 *      Charles Maier
 *
 *--------------------------------------------------------------------*/


/*====================================================================*"
 *   system header files;
 *--------------------------------------------------------------------*/

#include <unistd.h>
#include <stdlib.h>
#include <limits.h>
#include <string.h>
#include <ctype.h>

/*====================================================================*
 *   custom header files;
 *--------------------------------------------------------------------*/

#include "../tools/getoptv.h"
#include "../tools/putoptv.h"
#include "../tools/memory.h"
#include "../tools/number.h"
#include "../tools/symbol.h"
#include "../tools/types.h"
#include "../tools/flags.h"
#include "../tools/files.h"
#include "../tools/error.h"
#include "../tools/permissions.h"
#include "../plc/plc.h"
#include "../ram/nvram.h"
#include "../ram/sdram.h"
#include "../nvm/nvm.h"
#include "../pib/pib.h"
#include "../mme/mme.h"

/*====================================================================*
 *   custom source files;
 *--------------------------------------------------------------------*/

#ifndef MAKEFILE
#include "../tools/getoptv.c"
#include "../tools/putoptv.c"
#include "../tools/version.c"
#include "../tools/uintspec.c"
#include "../tools/hexencode.c"
#include "../tools/hexdecode.c"
#include "../tools/todigit.c"
#include "../tools/hexdump.c"
#include "../tools/hexout.c"
#include "../tools/error.c"
#include "../tools/synonym.c"
#include "../tools/desuid.c"
#endif

#ifndef MAKEFILE
#include "../mme/EthernetHeader.c"
#include "../mme/QualcommHeader.c"
#include "../mme/UnwantedMessage.c"
#include "../plc/Display.c"
#include "../plc/Devices.c"
#endif

#ifndef MAKEFILE
#include "../ether/initchannel.c"
#include "../ether/openchannel.c"
#include "../ether/closechannel.c"
#include "../ether/readpacket.c"
#include "../ether/sendpacket.c"
#include "../ether/channel.c"
#endif

#ifndef MAKEFILE
#include "../mme/MMECode.c"
#endif

/*====================================================================*
 *   program constants;
 *--------------------------------------------------------------------*/

#define INT6KID_DAK 0
#define INT6KID_NMK 1
#define INT6KID_MAC 2
#define INT6KID_MFG 3
#define INT6KID_USR 4
#define INT6KID_NET 5

/*====================================================================*
 *
 *   void ReadKey1 (struct channel * channel, unsigned c, int key);
 *
 *   read the first block of the PIB from a device then echo one of
 *   several parameters on stdout as a string; program output can be
 *   used in scripts to define variables or compare strings;
 *
 *   this function is an abridged version of ReadParameters(); it reads only
 *   the first 1024 bytes of the PIB then stops; most parameters of
 *   general interest occur in that block;
 *
 *
 *--------------------------------------------------------------------*/

static void ReadKey1 (struct channel * channel, unsigned c, int key)

{
	struct message message;
	static signed count = 0;
	signed packetsize;

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_rd_mod_request
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t MODULEID;
		uint8_t RESERVED;
		uint16_t MLENGTH;
		uint32_t MOFFSET;
		uint8_t DAK [16];
	}
	* request = (struct vs_rd_mod_request *)(&message);
	struct __packed vs_rd_mod_confirm
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t MSTATUS;
		uint8_t RESERVED1 [3];
		uint8_t MODULEID;
		uint8_t RESERVED2;
		uint16_t MLENGTH;
		uint32_t MOFFSET;
		uint32_t MCHKSUM;
		struct simple_pib pib;
	}
	* confirm = (struct vs_rd_mod_confirm *)(&message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	memset (&message, 0, sizeof (message));
	EthernetHeader (&request->ethernet, channel->peer, channel->host, channel->type);
	QualcommHeader (&request->qualcomm, 0, (VS_RD_MOD | MMTYPE_REQ));
	request->MODULEID = VS_MODULE_PIB;
	request->MLENGTH = HTOLE16 (PLC_RECORD_SIZE);
	request->MOFFSET = HTOLE32 (0);
	if (sendpacket (channel, &message, (ETHER_MIN_LEN - ETHER_CRC_LEN)) < 0)
	{
		error (1, errno, CHANNEL_CANTSEND);
	}
	while ((packetsize = readpacket (channel, &message, sizeof (message))) > 0)
	{
		if (UnwantedMessage (&message, packetsize, 0, (VS_RD_MOD | MMTYPE_CNF)))
		{
			continue;
		}
		if (confirm->MSTATUS)
		{
			error (0, 0, "%s (%0X): ", MMECode (confirm->qualcomm.MMTYPE, confirm->MSTATUS), confirm->MSTATUS);
			continue;
		}
		if (count++ > 0)
		{
			putc (c, stdout);
		}
		if (key == INT6KID_MAC)
		{
			hexout (confirm->pib.MAC, sizeof (confirm->pib.MAC), HEX_EXTENDER, 0, stdout);
			continue;
		}
		if (key == INT6KID_DAK)
		{
			hexout (confirm->pib.DAK, sizeof (confirm->pib.DAK), HEX_EXTENDER, 0, stdout);
			continue;
		}
		if (key == INT6KID_NMK)
		{
			hexout (confirm->pib.NMK, sizeof (confirm->pib.NMK), HEX_EXTENDER, 0, stdout);
			continue;
		}
		if (key == INT6KID_MFG)
		{
			confirm->pib.MFG [PIB_HFID_LEN - 1] = (char)(0);
			printf ("%s", confirm->pib.MFG);
			continue;
		}
		if (key == INT6KID_USR)
		{
			confirm->pib.USR [PIB_HFID_LEN - 1] = (char)(0);
			printf ("%s", confirm->pib.USR);
			continue;
		}
		if (key == INT6KID_NET)
		{
			confirm->pib.NET [PIB_HFID_LEN - 1] = (char)(0);
			printf ("%s", confirm->pib.NET);
			continue;
		}
	}
	if (packetsize < 0)
	{
		error (1, errno, CHANNEL_CANTREAD);
	}
	return;
}


/*====================================================================*
 *
 *   int main (int argc, char const * argv []);
 *
 *
 *
 *--------------------------------------------------------------------*/

int main (int argc, char const * argv [])

{
	extern struct channel channel;
	static char const * optv [] =
	{
		"Ac:Dei:MnNqSUv",
		"device",
		"Qualcomm Atheros Powerline Device Identity",
		"A\tEthernet address (MAC)",
		"c c\tcharacter delimiter is (c)",
		"D\tDevice Access Key (DAK)",
		"e\tredirect stderr to stdout",

#if defined (WINPCAP) || defined (LIBPCAP)

		"i n\thost interface is (n) [" LITERAL (CHANNEL_ETHNUMBER) "]",

#else

		"i s\thost interface is (s) [" LITERAL (CHANNEL_ETHDEVICE) "]",

#endif

		"M\tNetwork Membership Key (NMK)",
		"n\tappend newline on output",
		"N\tnetwork HFID",
		"q\tquiet mode",
		"S\tmanufacturer HFID",
		"U\tuser HFID",
		"v\tverbose mode",
		(char const *) (0)
	};
	signed newline = '\n';
	signed key = INT6KID_DAK;
	flag_t flags = (flag_t)(0);
	signed c;

	initchannel (&channel);
	desuid ();

	if (getenv (PLCDEVICE))
	{

#if defined (WINPCAP) || defined (LIBPCAP)

		channel.ifindex = atoi (getenv (PLCDEVICE));

#else

		channel.ifname = strdup (getenv (PLCDEVICE));

#endif

	}
	optind = 1;
	while ((c = getoptv (argc, argv, optv)) != -1)
	{
		switch (c)
		{
		case 'A':
			key = INT6KID_MAC;
			break;
		case 'c':
			newline = * optarg;
			break;
		case 'D':
			key = INT6KID_DAK;
			break;
		case 'e':
			dup2 (STDOUT_FILENO, STDERR_FILENO);
			break;
		case 'i':

#if defined (WINPCAP) || defined (LIBPCAP)

			channel.ifindex = atoi (optarg);

#else

			channel.ifname = optarg;

#endif

			break;
		case 'M':
			key = INT6KID_NMK;
			break;
		case 'n':
			_setbits (flags, PLC_NEWLINE);
			break;
		case 'N':
			key = INT6KID_NET;
			break;
		case 'q':
			_setbits (channel.flags, CHANNEL_SILENCE);
			_setbits (flags, PLC_SILENCE);
			break;
		case 'S':
			key = INT6KID_MFG;
			break;
		case 'U':
			key = INT6KID_USR;
			break;
		case 'v':
			_setbits (channel.flags, CHANNEL_VERBOSE);
			_setbits (flags, PLC_VERBOSE);
			break;
		default:
			break;
		}
	}
	argc -= optind;
	argv += optind;
	openchannel (&channel);
	if (!argc)
	{
		ReadKey1 (&channel, newline, key);
		if (_anyset (flags, PLC_NEWLINE))
		{
			putc (newline, stdout);
		}
	}
	while ((argc) && (* argv))
	{
		if (!hexencode (channel.peer, sizeof (channel.peer), synonym (* argv, devices, SIZEOF (devices))))
		{
			error (1, errno, PLC_BAD_MAC, * argv);
		}
		ReadKey1 (&channel, newline, key);
		if (_anyset (flags, PLC_NEWLINE))
		{
			putc (newline, stdout);
		}
		argv++;
		argc--;
	}
	closechannel (&channel);
	return (0);
}