curs_getch(3x) curs_getch(3x)
getch, wgetch, mvgetch, mvwgetch, ungetch, has_key - get (or push back)
characters from curses terminal keyboard
#include <curses.h>
int getch(void);
int wgetch(WINDOW *win);
int mvgetch(int y, int x);
int mvwgetch(WINDOW *win, int y, int x);
int ungetch(int ch);
int has_key(int ch);
The getch, wgetch, mvgetch and mvwgetch, routines read a character from
the window. In no-delay mode, if no input is waiting, the value ERR is
returned. In delay mode, the program waits until the system passes
text through to the program. Depending on the setting of cbreak, this
is after one character (cbreak mode), or after the first newline
(nocbreak mode). In half-delay mode, the program waits until a charac-
ter is typed or the specified timeout has been reached.
If echo is enabled, and the window is not a pad, then the character
will also be echoed into the designated window according to the follow-
ing rules:
o If the character is the current erase character, left arrow, or
backspace, the cursor is moved one space to the left and that
screen position is erased as if delch had been called.
o If the character value is any other KEY_ define, the user is alert-
ed with a beep call.
o If the character is a carriage-return, and if nl is enabled, it is
translated to a line-feed after echoing.
o Otherwise the character is simply output to the screen.
If the window is not a pad, and it has been moved or modified since the
last call to wrefresh, wrefresh will be called before another character
is read.
If keypad is TRUE, and a function key is pressed, the token for that
function key is returned instead of the raw characters:
o The predefined function keys are listed in <curses.h> as macros
with values outside the range of 8-bit characters. Their names be-
gin with KEY_.
o Other (user-defined) function keys which may be defined using de-
fine_key(3x) have no names, but also are expected to have values
outside the range of 8-bit characters.
Thus, a variable intended to hold the return value of a function key
must be of short size or larger.
When a character that could be the beginning of a function key is re-
ceived (which, on modern terminals, means an escape character), curses
sets a timer. If the remainder of the sequence does not come in within
the designated time, the character is passed through; otherwise, the
function key value is returned. For this reason, many terminals expe-
rience a delay between the time a user presses the escape key and the
escape is returned to the program.
In ncurses, the timer normally expires after the value in ESCDELAY (see
curs_variables(3x)). If notimeout is TRUE, the timer does not expire;
it is an infinite (or very large) value. Because function keys usually
begin with an escape character, the terminal may appear to hang in no-
timeout mode after pressing the escape key until another key is
pressed.
The ungetch routine places ch back onto the input queue to be returned
by the next call to wgetch. There is just one input queue for all win-
dows.
The following special keys are defined in <curses.h>.
o Except for the special case KEY_RESIZE, it is necessary to enable
keypad for getch to return these codes.
o Not all of these are necessarily supported on any particular termi-
nal.
o The naming convention may seem obscure, with some apparent mis-
spellings (such as "RSUME" for "resume"). The names correspond to
the long terminfo capability names for the keys, and were defined
long ago, in the 1980s.
Name Key name
-------------------------------------------------
KEY_BREAK Break key
KEY_DOWN The four arrow keys ...
KEY_UP
KEY_LEFT
KEY_RIGHT
KEY_HOME Home key (upward+left arrow)
KEY_BACKSPACE Backspace
KEY_F0 Function keys; space for 64 keys
is reserved.
KEY_F(n) For 0 <= n <= 63
KEY_DL Delete line
KEY_IL Insert line
KEY_DC Delete character
KEY_IC Insert char or enter insert mode
KEY_EIC Exit insert char mode
KEY_CLEAR Clear screen
KEY_EOS Clear to end of screen
KEY_EOL Clear to end of line
KEY_SF Scroll 1 line forward
KEY_SR Scroll 1 line backward (reverse)
KEY_NPAGE Next page
KEY_PPAGE Previous page
KEY_STAB Set tab
KEY_CTAB Clear tab
KEY_CATAB Clear all tabs
KEY_ENTER Enter or send
KEY_SRESET Soft (partial) reset
KEY_RESET Reset or hard reset
KEY_PRINT Print or copy
KEY_LL Home down or bottom (lower left)
KEY_A1 Upper left of keypad
KEY_A3 Upper right of keypad
KEY_B2 Center of keypad
KEY_C1 Lower left of keypad
KEY_C3 Lower right of keypad
KEY_BTAB Back tab key
KEY_BEG Beg(inning) key
KEY_CANCEL Cancel key
KEY_CLOSE Close key
KEY_COMMAND Cmd (command) key
KEY_COPY Copy key
KEY_CREATE Create key
KEY_END End key
KEY_EXIT Exit key
KEY_FIND Find key
KEY_HELP Help key
KEY_MARK Mark key
KEY_MESSAGE Message key
KEY_MOUSE Mouse event read
KEY_MOVE Move key
KEY_NEXT Next object key
KEY_OPEN Open key
KEY_OPTIONS Options key
KEY_PREVIOUS Previous object key
KEY_REDO Redo key
KEY_REFERENCE Ref(erence) key
KEY_REFRESH Refresh key
KEY_REPLACE Replace key
KEY_RESIZE Screen resized
KEY_RESTART Restart key
KEY_RESUME Resume key
KEY_SAVE Save key
KEY_SBEG Shifted beginning key
KEY_SCANCEL Shifted cancel key
KEY_SCOMMAND Shifted command key
KEY_SCOPY Shifted copy key
KEY_SCREATE Shifted create key
KEY_SDC Shifted delete char key
KEY_SDL Shifted delete line key
KEY_SELECT Select key
KEY_SEND Shifted end key
KEY_SEOL Shifted clear line key
KEY_SEXIT Shifted exit key
KEY_SFIND Shifted find key
KEY_SHELP Shifted help key
KEY_SHOME Shifted home key
KEY_SIC Shifted input key
KEY_SLEFT Shifted left arrow key
KEY_SMESSAGE Shifted message key
KEY_SMOVE Shifted move key
KEY_SNEXT Shifted next key
KEY_SOPTIONS Shifted options key
KEY_SPREVIOUS Shifted prev key
KEY_SPRINT Shifted print key
KEY_SREDO Shifted redo key
KEY_SREPLACE Shifted replace key
KEY_SRIGHT Shifted right arrow
KEY_SRSUME Shifted resume key
KEY_SSAVE Shifted save key
KEY_SSUSPEND Shifted suspend key
KEY_SUNDO Shifted undo key
KEY_SUSPEND Suspend key
KEY_UNDO Undo key
Keypad is arranged like this:
+-----+------+-------+
| A1 | up | A3 |
+-----+------+-------+
|left | B2 | right |
+-----+------+-------+
| C1 | down | C3 |
+-----+------+-------+
A few of these predefined values do not correspond to a real key:
o KEY_RESIZE is returned when the SIGWINCH signal has been detected
(see initscr(3x) and resizeterm(3x)). This code is returned
whether or not keypad has been enabled.
o KEY_MOUSE is returned for mouse-events (see curs_mouse(3x)). This
code relies upon whether or not keypad(3x) has been enabled, be-
cause (e.g., with xterm mouse prototocol) ncurses must read escape
sequences, just like a function key.
The has_key routine takes a key-code value from the above list, and re-
turns TRUE or FALSE according to whether the current terminal type rec-
ognizes a key with that value.
The library also supports these extensions:
define_key
defines a key-code for a given string (see define_key(3x)).
key_defined
checks if there is a key-code defined for a given string (see
key_defined(3x)).
All routines return the integer ERR upon failure and an integer value
other than ERR (OK in the case of ungetch) upon successful completion.
ungetch
returns ERR if there is no more room in the FIFO.
wgetch
returns ERR if the window pointer is null, or if its timeout
expires without having any data, or if the execution was inter-
rupted by a signal (errno will be set to EINTR).
Functions with a "mv" prefix first perform a cursor movement using
wmove, and return an error if the position is outside the window, or if
the window pointer is null.
Use of the escape key by a programmer for a single character function
is discouraged, as it will cause a delay of up to one second while the
keypad code looks for a following function-key sequence.
Some keys may be the same as commonly used control keys, e.g., KEY_EN-
TER versus control/M, KEY_BACKSPACE versus control/H. Some curses im-
plementations may differ according to whether they treat these control
keys specially (and ignore the terminfo), or use the terminfo defini-
tions. Ncurses uses the terminfo definition. If it says that KEY_EN-
TER is control/M, getch will return KEY_ENTER when you press control/M.
Generally, KEY_ENTER denotes the character(s) sent by the Enter key on
the numeric keypad:
o the terminal description lists the most useful keys,
o the Enter key on the regular keyboard is already handled by the
standard ASCII characters for carriage-return and line-feed,
o depending on whether nl or nonl was called, pressing "Enter" on the
regular keyboard may return either a carriage-return or line-feed,
and finally
o "Enter or send" is the standard description for this key.
When using getch, wgetch, mvgetch, or mvwgetch, nocbreak mode
(nocbreak) and echo mode (echo) should not be used at the same time.
Depending on the state of the tty driver when each character is typed,
the program may produce undesirable results.
Note that getch, mvgetch, and mvwgetch may be macros.
Historically, the set of keypad macros was largely defined by the ex-
tremely function-key-rich keyboard of the AT&T 7300, aka 3B1, aka Sa-
fari 4. Modern personal computers usually have only a small subset of
these. IBM PC-style consoles typically support little more than
KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_HOME, KEY_END, KEY_NPAGE,
KEY_PPAGE, and function keys 1 through 12. The Ins key is usually
mapped to KEY_IC.
The *get* functions are described in the XSI Curses standard, Issue 4.
They read single-byte characters only. The standard specifies that
they return ERR on failure, but specifies no error conditions.
The echo behavior of these functions on input of KEY_ or backspace
characters was not specified in the SVr4 documentation. This descrip-
tion is adopted from the XSI Curses standard.
The behavior of getch and friends in the presence of handled signals is
unspecified in the SVr4 and XSI Curses documentation. Under historical
curses implementations, it varied depending on whether the operating
system's implementation of handled signal receipt interrupts a read(2)
call in progress or not, and also (in some implementations) depending
on whether an input timeout or non-blocking mode has been set.
KEY_MOUSE is mentioned in XSI Curses, along with a few related terminfo
capabilities, but no higher-level functions use the feature. The im-
plementation in ncurses is an extension.
KEY_RESIZE is an extension first implemented for ncurses. NetBSD curs-
es later added this extension.
Programmers concerned about portability should be prepared for either
of two cases: (a) signal receipt does not interrupt getch; (b) signal
receipt interrupts getch and causes it to return ERR with errno set to
EINTR.
The has_key function is unique to ncurses. We recommend that any code
using it be conditionalized on the NCURSES_VERSION feature macro.
curses(3x), curs_inopts(3x), curs_outopts(3x), curs_mouse(3x),
curs_move(3x), curs_refresh(3x), curs_variables(3x), resizeterm(3x).
Comparable functions in the wide-character (ncursesw) library are de-
scribed in curs_get_wch(3x).
curs_getch(3x)