|
libfuse
|
#include "fuse_common.h"#include <fcntl.h>#include <time.h>#include <sys/types.h>#include <sys/stat.h>#include <sys/statvfs.h>#include <sys/uio.h>Go to the source code of this file.
Data Structures | |
| struct | fuse_config |
| struct | fuse_operations |
| struct | fuse_context |
Macros | |
| #define | fuse_main(argc, argv, op, private_data) fuse_main_real(argc, argv, op, sizeof(*(op)), private_data) |
| #define | FUSE_REGISTER_MODULE(name_, factory_) fuse_module_factory_t fuse_module_ ## name_ ## _factory = factory_ |
Typedefs | |
| typedef int(* | fuse_fill_dir_t) (void *buf, const char *name, const struct stat *stbuf, off_t off, enum fuse_fill_dir_flags flags) |
| typedef struct fuse_fs *(* | fuse_module_factory_t) (struct fuse_args *args, struct fuse_fs *fs[]) |
Enumerations | |
| enum | fuse_readdir_flags { FUSE_READDIR_PLUS = (1 << 0), FUSE_READDIR_PLUS = (1 << 0), FUSE_READDIR_PLUS = (1 << 0) } |
| enum | fuse_fill_dir_flags { FUSE_FILL_DIR_PLUS = (1 << 1), FUSE_FILL_DIR_PLUS = (1 << 1), FUSE_FILL_DIR_PLUS = (1 << 1) } |
Functions | |
| void | fuse_lib_help (struct fuse_args *args) |
| struct fuse * | fuse_new (struct fuse_args *args, const struct fuse_operations *op, size_t op_size, void *private_data) |
| int | fuse_mount (struct fuse *f, const char *mountpoint) |
| void | fuse_unmount (struct fuse *f) |
| void | fuse_destroy (struct fuse *f) |
| int | fuse_loop (struct fuse *f) |
| void | fuse_exit (struct fuse *f) |
| int | fuse_loop_mt_31 (struct fuse *f, int clone_fd) |
| struct fuse_context * | fuse_get_context (void) |
| int | fuse_getgroups (int size, gid_t list[]) |
| int | fuse_interrupted (void) |
| int | fuse_invalidate_path (struct fuse *f, const char *path) |
| int | fuse_main_real (int argc, char *argv[], const struct fuse_operations *op, size_t op_size, void *private_data) |
| int | fuse_start_cleanup_thread (struct fuse *fuse) |
| void | fuse_stop_cleanup_thread (struct fuse *fuse) |
| int | fuse_clean_cache (struct fuse *fuse) |
| struct fuse_fs * | fuse_fs_new (const struct fuse_operations *op, size_t op_size, void *private_data) |
| struct fuse_session * | fuse_get_session (struct fuse *f) |
This file defines the library interface of FUSE
IMPORTANT: you should define FUSE_USE_VERSION before including this header.
Definition in file fuse.h.
| #define fuse_main | ( | argc, | |
| argv, | |||
| op, | |||
| private_data | |||
| ) | fuse_main_real(argc, argv, op, sizeof(*(op)), private_data) |
Main function of FUSE.
This is for the lazy. This is all that has to be called from the main() function.
This function does the following:
Most file systems will have to parse some file-system specific arguments before calling this function. It is recommended to do this with fuse_opt_parse() and a processing function that passes through any unknown options (this can also be achieved by just passing NULL as the processing function). That way, the remaining options can be passed directly to fuse_main().
fuse_main() accepts all options that can be passed to fuse_parse_cmdline(), fuse_new(), or fuse_session_new().
Option parsing skips argv[0], which is assumed to contain the program name. This element must always be present and is used to construct a basic usage: message for the –help output. argv[0] may also be set to the empty string. In this case the usage message is suppressed. This can be used by file systems to print their own usage line first. See hello.c for an example of how to do this.
Note: this is currently implemented as a macro.
| argc | the argument counter passed to the main() function |
| argv | the argument vector passed to the main() function |
| op | the file system operation |
| private_data | Initial value for the private_data field of struct fuse_context. May be overridden by the struct fuse_operations.init handler. |
Example usage, see hello.c
| #define FUSE_REGISTER_MODULE | ( | name_, | |
| factory_ | |||
| ) | fuse_module_factory_t fuse_module_ ## name_ ## _factory = factory_ |
Register filesystem module
If the "-omodules=*name*_:..." option is present, filesystem objects are created and pushed onto the stack with the factory_ function.
| name_ | the name of this filesystem module |
| factory_ | the factory function for this filesystem module |
| typedef int(* fuse_fill_dir_t) (void *buf, const char *name, const struct stat *stbuf, off_t off, enum fuse_fill_dir_flags flags) |
Function to add an entry in a readdir() operation
The off parameter can be any non-zero value that enableds the filesystem to identify the current point in the directory stream. It does not need to be the actual physical position. A value of zero is reserved to indicate that seeking in directories is not supported.
| buf | the buffer passed to the readdir() operation |
| name | the file name of the directory entry |
| stat | file attributes, can be NULL |
| off | offset of the next entry or zero |
| flags | fill flags |
| typedef struct fuse_fs*(* fuse_module_factory_t) (struct fuse_args *args, struct fuse_fs *fs[]) |
Factory for creating filesystem objects
The function may use and remove options from 'args' that belong to this module.
For now the 'fs' vector always contains exactly one filesystem. This is the filesystem which will be below the newly created filesystem in the stack.
| args | the command line arguments |
| fs | NULL terminated filesystem object vector |
| enum fuse_fill_dir_flags |
| enum fuse_readdir_flags |
Readdir flags, passed to ->readdir()
| int fuse_clean_cache | ( | struct fuse * | fuse | ) |
| void fuse_destroy | ( | struct fuse * | f | ) |
Destroy the FUSE handle.
NOTE: This function does not unmount the filesystem. If this is needed, call fuse_unmount() before calling this function.
| f | the FUSE handle |
| void fuse_exit | ( | struct fuse * | f | ) |
| struct fuse_fs* fuse_fs_new | ( | const struct fuse_operations * | op, |
| size_t | op_size, | ||
| void * | private_data | ||
| ) |
Create a new fuse filesystem object
This is usually called from the factory of a fuse module to create a new instance of a filesystem.
| op | the filesystem operations |
| op_size | the size of the fuse_operations structure |
| private_data | Initial value for the private_data field of struct fuse_context. May be overridden by the struct fuse_operations.init handler. |
| struct fuse_context* fuse_get_context | ( | void | ) |
| struct fuse_session* fuse_get_session | ( | struct fuse * | f | ) |
| int fuse_getgroups | ( | int | size, |
| gid_t | list[] | ||
| ) |
Get the current supplementary group IDs for the current request
Similar to the getgroups(2) system call, except the return value is always the total number of group IDs, even if it is larger than the specified size.
The current fuse kernel module in linux (as of 2.6.30) doesn't pass the group list to userspace, hence this function needs to parse "/proc/$TID/task/$TID/status" to get the group IDs.
This feature may not be supported on all operating systems. In such a case this function will return -ENOSYS.
| size | size of given array |
| list | array of group IDs to be filled in |
| int fuse_interrupted | ( | void | ) |
| int fuse_invalidate_path | ( | struct fuse * | f, |
| const char * | path | ||
| ) |
Invalidates cache for the given path.
This calls fuse_lowlevel_notify_inval_inode internally.
| void fuse_lib_help | ( | struct fuse_args * | args | ) |
Print available options (high- and low-level) to stdout. This is not an exhaustive list, but includes only those options that may be of interest to an end-user of a file system.
The function looks at the argument vector only to determine if there are additional modules to be loaded (module=foo option), and attempts to call their help functions as well.
| args | the argument vector. |
| int fuse_loop | ( | struct fuse * | f | ) |
FUSE event loop.
Requests from the kernel are processed, and the appropriate operations are called.
For a description of the return value and the conditions when the event loop exits, refer to the documentation of fuse_session_loop().
| f | the FUSE handle |
See also: fuse_loop_mt()
| int fuse_loop_mt_31 | ( | struct fuse * | f, |
| int | clone_fd | ||
| ) |
FUSE event loop with multiple threads
Requests from the kernel are processed, and the appropriate operations are called. Request are processed in parallel by distributing them between multiple threads.
For a description of the return value and the conditions when the event loop exits, refer to the documentation of fuse_session_loop().
Note: using fuse_loop() instead of fuse_loop_mt() means you are running in single-threaded mode, and that you will not have to worry about reentrancy, though you will have to worry about recursive lookups. In single-threaded mode, FUSE will wait for one callback to return before calling another.
Enabling multiple threads, by using fuse_loop_mt(), will cause FUSE to make multiple simultaneous calls into the various callback functions given by your fuse_operations record.
If you are using multiple threads, you can enjoy all the parallel execution and interactive response benefits of threads, and you get to enjoy all the benefits of race conditions and locking bugs, too. Ensure that any code used in the callback function of fuse_operations is also thread-safe.
| f | the FUSE handle |
| config | loop configuration |
See also: fuse_loop()
| int fuse_main_real | ( | int | argc, |
| char * | argv[], | ||
| const struct fuse_operations * | op, | ||
| size_t | op_size, | ||
| void * | private_data | ||
| ) |
The real main function
Do not call this directly, use fuse_main()
| int fuse_mount | ( | struct fuse * | f, |
| const char * | mountpoint | ||
| ) |
| struct fuse* fuse_new | ( | struct fuse_args * | args, |
| const struct fuse_operations * | op, | ||
| size_t | op_size, | ||
| void * | private_data | ||
| ) |
Create a new FUSE filesystem.
This function accepts most file-system independent mount options (like context, nodev, ro - see mount(8)), as well as the FUSE-specific mount options from mount.fuse(8).
If the –help option is specified, the function writes a help text to stdout and returns NULL.
Option parsing skips argv[0], which is assumed to contain the program name. This element must always be present and is used to construct a basic usage: message for the –help output. If argv[0] is set to the empty string, no usage message is included in the –help output.
If an unknown option is passed in, an error message is written to stderr and the function returns NULL.
| args | argument vector |
| op | the filesystem operations |
| op_size | the size of the fuse_operations structure |
| private_data | Initial value for the private_data field of struct fuse_context. May be overridden by the struct fuse_operations.init handler. |
| int fuse_start_cleanup_thread | ( | struct fuse * | fuse | ) |
| void fuse_stop_cleanup_thread | ( | struct fuse * | fuse | ) |
| void fuse_unmount | ( | struct fuse * | f | ) |
Unmount a FUSE file system.
See fuse_session_unmount() for additional information.
| f | the FUSE handle |
1.8.13